If you want to use particles packing machine for long time, you should pay attention to maintaining it.
Gear Lubrication
1. The granules packing machine is equipped with a oil meter, oil the machine parts once before driving, midway can pour oil based on temperature of the bearings and running situation.
2. Worm gear box must store machine oil for long term, and the oil level should be higher than wrom gear. For the frequent use, oil should be replaced for every three months. There is oil plug at the bottom for draining the oil.
3. When refueling the machine, do not make the oil spill out of the cup, not to flow around or on the ground. Because oil is easy to make the material pollute, affect the quality of the product.
Maintenance Instruction
1. Regularly check the machine parts, at least once a month, check rotate situation and wear pattern of the worm gear, worm, lubricating block bolts, bearings and other activities part, and the defects should be repaired in time when finding problems;
2. The particles packaging machine should be placed in dry and clean indoor, not in the atmosphere containing acid and other corrosive gases;
3. When the machine finishs working, should take out the rotating drum for cleaning and brush the remaining powder in the bucket, and then put it in order to prepare for the next use.
4. When the drum in the work place before and after the move, the M10 screw bearing soldier to the proper position just before the school. If the gear axis traverse, please adjust the bearing frame behind the M10 screw to a proper position, adjust the gap to the bearing sound, hand turn the belt pulley, elastic proper and appropriate, too tight or too loose can enable the machine to the event of damage possible.
5. If this machine doesn't be used for a long time, wipe out the machine body to keep clean, cover the parts of the surfacewith anti-rust oil, and then cover with cloth punta.